Power-Flo Technologies PFG Series Grinder Pump

Name: Power-Flo Technologies PFG Series Grinder Pump
Price: 7421.97 USD
Availability: BackOrder

3,450 RPM, 60Hz.

Select your options below…

"{{ option.noLongerAvailable }}" is no longer a valid option. Please choose from the current set of options.

Need help? Call one of our pump experts at 1-802-255-4003. We’re open Mo-Fr 8:30am to 5:00pm ET.

Starting Price: $7,421.97

Selected Options: + ${{ calcAdditionalCost | formatCurrency }}

Request pricing below.

${{ calcCost | formatCurrency }} per {{ calcQuantity }} (${{ unitPrice | formatCurrency }} each) per {{ boxQuantity }} (${{ unitPrice | formatCurrency }} each)

Configured Part No. {{ calcPartNumber }}

Alternate Part Nos. {{pn}}
{{pn}}

Request Quick Quote

Get Business Financing!
Payments as low as ${{monthlyPayments}}/mo

Product Manual

Highlights...

By Power-Flo Technologies
Call for Availability

Features

3, 5, or 7.5 HP
2in FNPT vertical discharge, double seal
160°F intermittent liquid temperature
103 GPM max. flow
Manual operation
Voltage/phase options:
- 230/1 (only available with 3 or 5 HP)
- 230/3
- 460/3
Cast iron, Class 30 motor housing, volute, and seal plate
Seal:
- Tandem double mechanical
- Oil-filled reservoir
- Upper: 1-1/4in carbon/ceramic/Buna-N
- Lower: 1-1/8in silicon carbide/silicon carbide/Viton
Single row, ball, lubricated upper and lower bearings

The Power-Flo Technologies PFG Series Grinder Pump is submersible and designed to reduce domestic, commercial, institutional, and light industrial sewage to a finely ground slurry. The pump is composed of a dynamically balanced, 12-vane, ISO G6.3, cast iron vortex impeller with pump out vanes on the back side, and stainless steel shaft, hardware, shredding ring, and cutter. The motor is composed of Class F insulation, is oil-filled, and uses squirrel cage induction. The motor is available as either a single phase or three phase. The single phase motor uses a capacitor start / capacitor run, and requires a starter or a control panel that includes the capacitors; overload protection is included in the single phase motor. The three phase is a dual voltage 230/460, and requires overload protection in the control panel.

The seal leak sensor is a two probe design, normally open (N/O) sensor that requires a relay in the control panel (included in PF panels). The temperature sensor is normally closed (NC), and requires a relay in the control panel (included in PF panels).